RFC 7774: Multicast Protocol for Low-Power and Lossy Networks (MPL) Parameter Configuration Option for DHCPv6
In plain English — editorial summary, not part of the RFC
This document defines a way to configure a parameter set for MPL (Multicast Protocol for Low-Power and Lossy Networks) via a DHCPv6 option. MPL has a set of parameters to control its behavior, and the parameter set is often configured as a network-wide parameter because the parameter set should be identical for each MPL Forwarder in an MPL Domain. Using the MPL Parameter Configuration Option defined in this document, a network can easily be configured with a single set of MPL parameters.
Document record
- Document ID
- RFC7774
- Published
- March 2016
- Authors
- Y. Doi; M. Gillmore
- Status
- PROPOSED STANDARD
- Stream
- IETF
- Area
- rtg
- Pages
- 10
- Also known as
- —
Topics
Related documents
Ranked automatically by shared keywords, IETF area and stream — not by editorial selection.
- RFC 7732Forwarder Policy for Multicast with Admin-Local Scope in the Multicast Protocol for Low-Power and Lossy Networks (MPL)Current
February 2016
- RFC 7839Access-Network-Identifier Option in DHCPCurrent
June 2016
- RFC 7844Anonymity Profiles for DHCP ClientsCurrent
May 2016
- RFC 7653DHCPv6 Active LeasequeryCurrent
October 2015
- RFC 7934Host Address Availability RecommendationsCurrent
July 2016
- RFC 7598DHCPv6 Options for Configuration of Softwire Address and Port-Mapped ClientsUpdated
July 2015
- RFC 7969Customizing DHCP Configuration on the Basis of Network TopologyCurrent
October 2016
- RFC 8156DHCPv6 Failover ProtocolCurrent
June 2017
Also filed under
About this page
The document record above — title, authors, date, status, stream, area, relationships, DOI and errata — is imported verbatim from the public RFC Editor index. The “in plain English” section is editorial: written by The metasystema editorial team, not part of the RFC. Where the two differ, the RFC text governs.
Last checked against the RFC Editor index on . RFCs are never revised after publication; changes are issued as new documents.
Data sources · Editorial policy · Report a correction · What is an RFC?